Bracket 1 is the Professional Solution for mounting Wireless Receivers
and Hard Disk Recorders to your camcorder
Phone orders using your credit card from 10am - 6pm Pacific Time or
pay by Pay Pal anytime, no Pay Pal account necessary!
Our new handle mount bracket system attaches to existing 1/4-20 threaded holes in the camera's handle and supports a variety of adapters making this one of the most versatile mounting system for customizing your camera accessory configuration! Go to the Base A system page here
Designed for:
- Panasonic AG-AF100, AG-HPX255, AG-HPX250, AG-AC160, AG-AC130, AG-AC120
- Sony PMW-F3, NEX-FS100, NEX-FS100
- ...and any other camera with two 1/4-20 threaded holes spaced 1.5" apart
Improved, second generation model; thicker and stronger design for stability under a full load of gear. For use with the new, wider body high definition cameras as well as older models. Locates your wireless receiver in the middle of the right side of the camera for perfect balance when shooting handheld or tripod mounted. Constructed from ultra-light, high strength aluminum, this versatile bracket can be configured with an additional cold shoe and/or any of our accessory adapters, allowing multiple wireless receivers, a hard disk recorder, and other accessories to be mounted simultaneously!
Designed for:
- Sony HVR-Z5U, Z1U, V1U, HDR-FX1, FX7, pd 150, pd 170 and vx series
- Panasonic HEA1, AG-HPX170P2, AG-HPX250 P2, AG-HMC150, AG-HVX200 and AG-DVX100
- Canon XF300, XF305, GL1, GL2, XH A1, and XH G1
- ... and most other mid size camcorders
Price: $139.95
Specifically designed for the Sony EX series cameras as well as the Sony NX5u. Includes all the features of our Bracket 1 HD and will fit most of the same cameras, but allows extra room for the EX-1 and EX-3 swivel handle. Now in it's second generation, the Bracket 1 EX2 fits closer to the camera and is stiffer to avoid excessive flexing under a heavy load of gear. Add any of our accessory adapters to ease mounting your wireless receiver and other accessories!
Designed for:
- Sony PMW-200, PMW-F3, NEX-FS100, HVR-Z7u, NX5u, PMW-EX1, EX1R and EX3
- Panasonic AG-AC130, AG-AC160, AG-AF100
- Canon EOS-C300, EOS-C100
- JVC GYHM600
Price: $149.95
A re-design of the Bracket 1c to reposition the mounting position of accessories for better handheld balance on the Canon XL series. The bracket also fits some of the full size shoulder held cameras but interferes with mounting the longer, full size tripod plates on these models. Add any of our accessory adapters to ease mounting your wireless receiver and other accessories!
Designed for:
- Canon XLH1, XLH1a, XL2, XL1s, and XL1
- Panasonic AG-HMC70u
- Sony HXR-MC2000u, HVR-HD1000, HVR-S270
- JVC GYHM700, GYHM750, GYHD100, GYHD110, GYHD200, and GYHD250
Hand held / shoulder mount only for the following full size camera models (interferes with mounting full size tripod plates)
Price: $129.95
Redesigned with thicker support to avoid flex under heavy load, our full feature design for the latest group of mini pro cameras such as the popular Canon HV-30 and Sony HVR-A1U. All the features of the Bracket 1 HD in a smaller package! This smaller size bracket will also work with most cameras that the Bracket 1 HD fits. Add any of our accessory adapters to ease mounting your wireless receiver and other accessories!
Designed for:
- Canon XA10, XF105, HV20, HV30, HV40 and all Vixia series
- Sony NEX-VG10, HRX-MC50u, MC50, HVR-A1-U, HDR-SR1, HDR-HC7, PDX-10, PD-100
- JVC GYHM150, GYHMQ10, GY-HM100u, GZ-HD7, GZ-HD6 & HD5
- Panasonic AG-HMC40, HSC1, DVC30
- ...and all other mini camcorders
Price: $129.95
For those of you shooting video with your digital SLR camera such as the popular Canon and Nikon D Series, this bracket is based on the Bracket 1 mini2 and customized for holding wireless microphone receivers and other accessories to your still camera. The alignment pin is recessed and accessories are mounted on the left side of the camera allowing full access to your focus adjustment and camera grip on either side. The bracket can also be flipped around and mounted on the right side of the camera and can be stacked to have one on each side. Add extra "cold shoes" or any of our other accessory adapters to ease mounting your wireless receivers and other accessories!
Designed for:
- Canon EOS 1D Mark IV, 7D, Rebel T1i, T2i, 30D, 40D, 50D,
- Nikon D3S, D300, D700, D5000,
- Panasonic DMC-GH2
- Pentax K-7, K-x
- ...and all other still cameras, SLRs and mini camcorders
Price: $129.95
Here's our new "multi-cold-shoe" solution for your DSLR. Comes with six permanently attached cold shoes and a swing out leg to act as a tripod when you set the camera down. Add one of our Over Camera Cold Shoes accessory adapters for even more cold shoe mounting positions! As with all our brackets, this product is super light-weight aluminum with stainless steel hardware and attaches to the tripod mounting hole of your camera while allowing for the tripod to screw to the bottom of the bracket.
Designed for:
- DSLRs & Still Cameras
- Canon EOS 1D Mark IV, 7D, Rebel T1i, T2i, 30D, 40D, 50D,
- Nikon D3S, D300, D700, D5000,
- Panasonic DMC-GH2
- Pentax K-7, K-x
- ...and all other still cameras, SLRs and mini camcorders
- Video Cameras
- Canon XF105, HV20, HV30, HV40 and all Vixia series
- Sony NEX-VG10, HRX-MC50u, MC50, HVR-A1-U, HDR-SR1, HDR-HC7, PDX-10, PD-100
- JVC GY-HM100u, GZ-HD7, GZ-HD6 & HD5
- Panasonic AG-HMC40, HSC1, DVC30
Price: $119.95
Here's our new "multi-cold-shoe" solution for your small camcorder or digital SLR. Comes with three permanently attached cold shoes and a swing out leg to act as a tripod when you set the camera down. Stack two of these brackets or add one of our Over Camera Cold Shoes accessory adapters for an almost unlimited number of cold shoes and mounting positions! As with all our brackets, this product is super light-weight aluminum with stainless steel hardware and attaches to the tripod mounting hole of your camera while allowing for the tripod to screw to the bottom of the bracket.
Designed for:
- Video Cameras
- Canon XF105, HV20, HV30, HV40 and all Vixia series
- Sony NEX-VG10, HRX-MC50u, MC50, HVR-A1-U, HDR-SR1, HDR-HC7, PDX-10, PD-100
- JVC GY-HM100u, GZ-HD7, GZ-HD6 & HD5
- Panasonic AG-HMC40, HSC1, DVC30
- Still Cameras
- Canon EOS 1D Mark IV, 7D, Rebel T1i, T2i, 30D, 40D, 50D,
- Nikon D3S, D300, D700, D5000,
- Pentax K-7, K-x
- ...and all other still cameras, SLRs and mini camcorders
Price: $59.95
The original! Locates your wireless receiver on the right side of the camera, close to the front. Fits close to the camera to allow for ease of use with a raincover. Excellent for tripod mounted shooting. Good hand held with the lighter receivers. Constructed from ultra-light aluminum, Bracket 1a weighs only 9 oz. Add any of our accessory adapters to ease mounting your wireless receiver and other accessories!
Designed for:
- Sony HVR-Z1U, HVR-V1U, HVR-A1U, pd 150, pd 170, and vx series
- Panasonic AG-HPX70, HMC150, AG-HVX200, AG-DVX100 and others with similar camera body
- Canon XHA1, XHG1, GL1, GL2
- ... and most other mid size camcorders
Price: $99.95
Just like the Bracket 1a but slightly longer. The original version (WHILE SUPPLIES LAST) to fit the Canon XL series and some JVC cameras. Add any of our accessory adapters to ease mounting your wireless receiver and other accessories!
Designed for:
- Canon XLH1, XLH1a, XL2, XL1s, and XL1
- JVC GY-HD100, HD110, HD200, and HD250
Price: $69.95