Location
Home / A/V Recorder Mounts

A/V Recorder Mounts

A/V Recorder Mounts

Adapters for mounting audio and video recorders to your camcorder or DSLR

Bracket 1 micro2

Multi-Shoe mount bracket solution for your DSLR or small camcorder. Perfect for attaching your audio recorder, wireless microphone receivers and shotgun mike. Comes with three permanently attached shoes on an adjustable arm with a solid base that allows for a solid mount onto your camera and tripod. As with all our brackets, this product is super light-weight aluminum with stainless steel hardware and attaches to the tripod mounting hole of your camera, while allowing your tripod plate to screw to the bottom of the bracket. Mfr# VISLBRMIC2

$179.95
Bracket 1 DSLR

Attach multiple wireless receivers, audio/video recorders, shotgun microphones, lights and other accessories to your camcorder! This versatile camera accessory bracket can be configured with additional shoe mounts and accessory adapters, allowing a variety of video and audio accessories to be mounted simultaneously. Perfect for shooting handheld or tripod mounted. Constructed from super light-weight aluminum and stainless steel hardware, it attaches to the tripod mounting hole of your camera, while allowing your tripod plate to screw to the bottom of the bracket. This model has a recessed alignment pin for mounting on DSLR bodies and can be mounted in two positions, locating the mounting plate on either side of the camera, just outside your hand for great balance when shooting handheld. Use the "Bracket Finder" in the top left corner of this page to find other bracket options for your DSLR or camcorder. Mfr# VISLBRSLR

$169.95
Shoe Mount For 1/4-20 Threaded Holes

Shoe Mount adapter kit attaches to any 1/4-20 threaded hole, standard on many camera handles and accessory rigs (also includes smaller screws for the side mount position on standard Bracket 1 brackets). Perfect for adding a light, wireless receiver, shotgun mike or any shoe mountable accessory!

$29.95
Quick Plate

Universal wireless receiver and accessory mounting adapter. A low cost solution for attaching your wireless receiver, Audio/Video recorder or other accessories to the Bracket 1 bracket system or any camera with the industry standard mounting pattern. A Velcro type strap cinches tight around the accessory, firmly holding the receiver against two rubber pads. Two Quick Plates can be mounted back to back on any Bracket 1 bracket to hold 2 wireless receivers or accessories. Quick Plate with standard Velcro Strap (included) will accept an accessory up to about 9" in circumference. Add a Large, XL or XXL Velcro Strap for bigger items. Mfr# VISLQP

$74.95
Universal Wireless Receiver Mounting Kit

Universal Wireless Receiver Mounting Kit - Attaches to any Shoe Mount or 1/4-20 threaded hole on your camera! Accepts most any Wireless Microphone Receiver and many other accessories as well. Velcro Strap cinches tight against receiver, pressing into the deep rubber padded plate for a secure attachment. Tabbed bottom for extra security. Angled bracket with multiple mounting holes allows for mounting in different directions. Kit includes one Quick Plate, one angled adapter bracket and one 1/4-20 Threaded Cold Shoe Adapter / Threaded Hole Adapter. Mfr# VISLQPK

$159.95
Shoe to Threaded  1/4-20 Adapter

Cold Shoe mounted Threaded Stud adapter. Fixed position adapter mounts in any hot or cold shoe and provides a 1/4-20 screw with a locking plate for mounting accessories. Perfect for a video monitor, Audio/Video recorder or the Focus Flash Recorder Cradle. Mfr# VISLCSTA

$24.95
Universal Swivel Mount HD

This fully adjustible, heavy-duty universal joint mounts in any cold shoe and provides a 1/4-20 screw with a locking plate for mounting accessories. Perfect for mounting a monitor or any of the Audio/Video Recorder Cradles.

$45.95
Universal Audio Recorder Mounting Kit

A solid mounting surface for your Audio Recorder, wireless receiver or most any accessory or accessory adapter including Bracket 1 Quick Plates and wireless receiver boxes. Accessories can be mounted using the supplied 1/4-20 screw, Velcro pad, or 4 offset screws. Kit includes a 1/4-20 Threaded Cold Shoe Adapter so you can mount in any hot shoe or cold shoe. Mfr# VISLUMPK

$79.95
3"x 4" Velcro Pad with Adhesive

Velcro Pads with adhesive on the backside. Attach one side to your accessory equipment and the other to a mounting surface to easily mount your accessories with the removable ease of velcro. Three sizes available: 2"x4", 3"x4", 4"x6". Mfr# VISLVP3

$14.95
4"x 6" Velcro Pad with Adhesive

Velcro Pads with adhesive on the backside. Attach one side to your accessory equipment and the other to a mounting surface to easily mount your accessories with the removable ease of velcro. Three sizes available: 2"x4", 3"x4", 4"x6". Mfr# VISLVP4

$16.95
Black Magic Hyperdeck Shuttle Cradle Mount

Cradle for Mounting the Black Magic Hyper-Deck Shuttle. Updated mounting configuration to include threaded hole pattern on front and back for Anton Bauer and IDX Battery Systems as well as industry standard 4 hole pattern for mounting an external battery, wireless receiver box or other accessories on back (or top) of the cradle. For choices in camera mounting solutions, the underside has a variety of hole patterns including IDX and Anton Bauer plates (see Accessories/Adapters tab below), the industry standard offset 4 hole pattern, a single 1/4-20 threaded hole, and countersunk 1/4" blank holes for attaching to multiple configurations of the Bracket1 BaseA Handle Mount system. Aluminum construction can be easily custom drilled. Mfr# VISLBMSC

$149.95
Canon-Focus Flash Recorder Cradle

Mounting Cradle for the Canon / Focus Enhancements Flash Recorder. Mounts the FS-CF, FS-5, FSH200, FS-CV, or MRHD100 to any of our Bracket 1 bracket systems or use a Threaded Cold Shoe Adapter to attach to the shoe mount on your camera. Attach directly to the side of the standard Bracket 1 bracket or use the "Over Camera Cold Shoe-M" with the "Cold Shoe Threaded Adapter" or "Universal Swivel Mount" for an easy to read mounting position! Light weight aluminum with one stainless steel, 1/4-20 threaded mounting hole. Mfr# VISLFSC

$79.95
Bracket Finder
Quick Store Search
Banner Adverts
Universal Wireless Receiver Mount

858-270-3333   M-F 10-6 PT

Login Status
Bracket 1
Your Cart
Your Cart: Empty
© 2024 Bracket 1, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.060374 Seconds Memory Usage: 3.996712 Megabytes
Kryptronic